Name: SOUTHPAW  Home Port: Port Orchard, Washington  Owners: Charles F. &. Paula Anne Rader  Address: 2107 SE Harding Ave., Port Orchard, WA 98366-3062, USA  Phone: 1-360-876-8543  Email: crader@sincom.com

Hull:    type            when purchased     when launched            hull builder          material           skipjack                                                2000                         owner                 wood  LOA          LWL          beam         draft         capacity               speed                 weight  19 feet     18 feet         5 feet       1.5 feet        4 adults               5 knots              2,000 lbs.  Other: Hull is based on a fantail Skipjack design by Harry Sucher and is constructed of 3/8" plywood over frames, then covered with fiberglass and epoxy.

Engine:   type     year built     builder      # of cylinders    bore & stroke    valve type(s)               simple        1970     Tiny Power           one                 3" x 4"           "D" slide  ihp          rpm            reverse type              condenser type & size                       vacuum   5            300            Stephenson            keel, 0.75" copper, 1.57 sq.ft.                   none  Other: This is the same engine which powered the first Southpaw.

Propulsion:    dia. & pitch    # of blades       material       make      RH or LH     shaft size                           16" x 18"           three            bronze     unknown         RH            1" dia.  steering                     auxilliaries                     paddlewheel (dia., width, & # of buckets)  teleflex

Boiler:    type          builder          year built      bhp     operating pressure             gauges            Roberts      Beckmann            1995          n.a.              110 psi                          six  overall size       # & size of tubes     Heat.Surface     economizer HS       superheater HS  36" x 36" x 42"         n.a.                     25 sq.ft.                  none                      2 sq.ft.  fuel              grate area     stack dia. & height         pump type       injector type     tanks  propane               n.a.              7" dia. x 3'             displacement            none            5 gal.

Additional: