Name: OTTER

 Home Port: Menlo Park, California

 Owners: Bart Smaalders
 Address: 509 San Benito Ave., Menlo Park, CA 94025-1933, USA
 Phone: 1-650-298-8839
 Email: barts@smaalders.net
 Website: http://smaalders.net/~barts/boat.html

 Hull:    type            when purchased     when launched            hull builder          material
     fantail skipjack            1990                     1990               Aeolus Boatworks       wood

 LOA          LWL          beam         draft         capacity               speed                 weight
 19 feet     17 feet         5 feet        1.2 feet       4 adults              6 knots                900 lbs.

 Other: Built by Bill Grunwald of Aeolus Boatworks, Davenport, California of Douglas fir plywood and mahogany with painted canvas deck.

 Engine:   type     year built     builder      # of cylinders    bore & stroke    valve type(s)
    double simple     1989          owner                 two               2" x 2.5"         "D" slide

 ihp          rpm            reverse type              condenser type & size                       vacuum
  2            500            slip eccentric         keel, 0.75" copper, 1.2 sq.ft.                     none

 Other: The engine is single acting, built from a GE refrigeration compressor with a single, balanced slide valve. There are photos on the owner's website which clearly show the valve arrangement.

 Propulsion:    dia. & pitch    # of blades       material       make      RH or LH     shaft size
                         13" x 17"            three           bronze     unknown          RH           1" dia.
 steering                     auxilliaries                     paddlewheel (dia., width, & # of buckets)
 tiller        

 Boiler:    type          builder          year built      bhp     operating pressure             gauges
        Lune Valley      owner              1995          n.a.                180 psi                       two
 overall size       # & size of tubes     Heat.Surface     economizer HS       superheater HS
  19"dia. x 36"tall           n.a.                 17 sq.ft.               1.4 sq.ft.                     none
 fuel              grate area     stack dia. & height         pump type       injector type     tanks
 oil                      n.a.                7" dia. x 4'                    piston                  none          9 gal.

 Additional: Otter was inexpensive to built (a "must" when you're starting a family) and has been enjoyed by the family, including extended cruising in the San Juan Islands of Washington State.

Otter at with owner and his son, c. 2002.