Name: OLY  Home Port: Portland, Oregon  Owners: Myles Twete  Address: 4936 SE Flavel Drive, Portland, OR 97206, USA  Phone: 1-503-267-6465  Email: matwete@comcast.net  Website: http://home.comcast.net/~matwete/nwss/SLoly.html

Hull:    type            when purchased     when launched            hull builder          material           fantail                    1998                       1978               Ralph Beaufort      fiberglass  LOA          LWL          beam         draft         capacity               speed                 weight  20 feet     18.5 feet        5 feet        1 feet         4 adults               5 knots              700 lbs.  Other: Another of the fiberglass hulls taken from the original Rose mold, construction was started by Ralph Beaufort while still in high school.

Engine:   type     year built     builder      # of cylinders    bore & stroke    valve type(s)           dbl. steeple     1975    Ralph Beaufort     four         1.5"+3"x2.5"     "D" slide  ihp          rpm            reverse type              condenser type & size                       vacuum  4             300            Stephenson              keel, 0.7.65" copper, 1 sq.ft.                      ?  Other: The builder's father, John Beaufort, had the Blackstaffe/Wood patterns and made casting sets in aluminum. Two sets of castings were coupled on one bedplate for this unusual double-steeple compound.

Propulsion:    dia. & pitch    # of blades       material       make      RH or LH     shaft size                           14" x 20"           three           bronze     unknown          RH              1" dia.  steering                     auxilliaries                     paddlewheel (dia., width, & # of buckets)  push rod

Boiler:    type          builder          year built      bhp     operating pressure             gauges           Offeldt          unknown           1976           n.a.              125 psi                         two  overall size       # & size of tubes     Heat.Surface     economizer HS       superheater HS  16" x 25" x 18"            n.a.                  18 sq.ft.                   none                         none  fuel              grate area     stack dia. & height         pump type       injector type     tanks  BIOdiesel          n.a.               6" dia. x 5'             displacement           none            2 gal.

Additional: The owner will be experimenting with burning BIOdiesel - an environmentally "clean" and renewable fuel - hoping, also, to decrease "clogging" of the vaporizing burner.