Name: OESA  Home Port: Surrey, British Columbia, Canada  Owners: Ken & Betty Hall  Address: 16462 - 28th Avenue, Surrey, BC, Canada V4P 2W2  Phone: 1-604-531-8608

Hull:    type            when purchased     when launched            hull builder          material            fantail                    1994                       1997                   Elliott Bay         fiberglass  LOA          LWL          beam         draft         capacity               speed                 weight  23.5 feet   19.5 feet      6 feet        1.5 feet       7 adults           6.5 knots             3,600 lbs.  Other: Owner purchased the "bare" hull and did all of the finish work.

Engine:   type     year built     builder      # of cylinders    bore & stroke    valve type(s)                 triple        1996         owner             three     2.75"+4.375"+6.5"x4"     piston  ihp          rpm            reverse type              condenser type & size                       vacuum  8             375             Stephenson         keel, 0.875" copper, 3.3 sq.ft.                      26"  Other: The engine was built by the owner from castings supplied by Elliott Bay Launch. The owner made modifications to the valve gear including "gags" for each valve.

Propulsion:    dia. & pitch    # of blades       material       make      RH or LH     shaft size                           20" x 34"           three           bronze      Osborne          RH         1.25" dia.  steering                     auxilliaries                     paddlewheel (dia., width, & # of buckets)  teleflex

Boiler:    type          builder          year built      bhp     operating pressure             gauges               Offeldt        owner               1996           10              185 psi                            five  overall size       # & size of tubes     Heat.Surface     economizer HS       superheater HS  27" x 30" x 28"           n.a.                  49 sq.ft.                 7 sq.ft.                       4.3 sq.ft.  fuel              grate area     stack dia. & height         pump type       injector type     tanks  wood/oil       3.25 sq.ft             8" dia. x 5.2'           displacement     Model Eng.    33 gal.

Additional: Boiler feed pump is 0.75" x 2.5" single acting, condensate pump is 3.25" x 2.5" double acting, both operating off crankshaft at 3:1 stepdown.