Name: OCEANID (ex H.S.L. 370) Home Port: Seattle, Washington Owners: Robert & Vicki Schildwachter Address: 2315 Perkins Lane W., Seattle, WA 98199, USA Phone: 1-206-283-3574 |
Hull: type when purchased when launched   hull builder material pinnace 1990 1945 wood LOA LWL beam draft capacity speed weight 60 feet 52 feet 13 feet 6 feet 10 adults 8+ knots x,xxx lbs. Other: Built during WW II as a 52 foot Harbor Service Launch for the Royal Navy, she was bought in 1961 by Robert Ellis, who had her completed refitted in England, including lengthening to her present 60'. |
Engine: type year built builder # of cylinders bore & stroke valve type(s) compound 1945 Sissons two 8" + 16" x 8" "D" slide ihp rpm reverse type condenser type & size vacuum 75 200 Stephenson inboard, shell, 52 sq.ft. 25" Other: Feed and bilge pumps work off HP crosshead; air and condensate off LP. Main circulator pump is driven by 2" x 2.5" engine at 600rpm. 110 vdc generator is driven by a Sissons enclosed engine at 1100 rpm. A donkey feed pump is used for standby. |
Propulsion: dia. & pitch # of blades material make   RH or LH shaft size 36" x 48" three bronze unknown RH 3" dia. steering auxilliaries paddlewheel (dia., width, & # of buckets) shaft |
Boiler: type builder year built bhp operating pressure gauges Scotch Ruston & Hornsby 1945 n.a. 120 psi four overall size # & size of tubes Heat.Surface economizer HS superheater HS 6' dia x 6' long xx x 1" 264 sq.ft. none none fuel grate area stack dia. & height pump type injector type tanks oil n.a. 13" dia. x x.x' displacement Penberthy 300 gal. |
Additional: A comprehensive, indepth article on Oceanid is in the July-August 1963 issue of Steamboats & Modern Steam Launches. |
|