Name: NO NAMEVessel Under Construction
 Home Port: Poulsbo, Washington
 Owners: Kent & Connie Lord
 Address: 18723 Ness Pl., Poulsbo, WA 98370, USA
 Phone: 1-360-779-6142

 Hull:    type            when purchased     when launched            hull builder          material
           fantail                                                                                 owner                  steel
 LOA          LWL          beam         draft         capacity               speed                 weight
 36 feet     33 feet         9.5 feet      3 feet         4 adults             7+ knots              14 tons
 Other: The owner is building the hull from "scratch" to plans by Tom Colvin of Florida, who calls it a modified oyster boat.

 Engine:   type     year built     builder      # of cylinders    bore & stroke    valve type(s)
          compound     2000          owner                two         3.75"+7.75"x6"     piston/slide
 ihp          rpm            reverse type              condenser type & size                       vacuum
 20           200           Stephenson                                                                
 Other: The engine castings were supplied by Scripps, patterned after the Navy "K".

 Propulsion:    dia. & pitch    # of blades       material       make      RH or LH     shaft size
                         30" x 50"          three             bronze                              RH        
 steering                     auxilliaries                     paddlewheel (dia., width, & # of buckets)
 hydraulic

 Boiler:    type          builder          year built      bhp     operating pressure             gauges
  vert. fire tube     Everett Eng.        2000                               175 psi                          
 overall size       # & size of tubes     Heat.Surface     economizer HS       superheater HS
 34"dia. x 54"high                                125 sq.ft.                yes                            yes
 fuel              grate area     stack dia. & height         pump type       injector type     tanks
 wood            4.58 sq.ft.                                           displacement                              35 gal.

 Additional: The owner has planned bunker space for 1 cord of wood.

 No photo of the vessel is available.