Name: CHARLIE

 Home Port: Shoreline, Washington

 Owners: Robert J. & Cherie Dutton
 Address: 704 N. 150th Street, Shoreline, WA 98133, USA
 Phone: 1-206-364-8549

 Hull:    type            when purchased     when launched            hull builder          material
          Poulsbo                   1999                      1973              Skookum Marine      fiberglass

 LOA          LWL          beam         draft         capacity               speed                 weight
 15.25 feet   15 feet        5 feet      1.75 feet       4 adults           4.1 knots             1,250 lbs.

 Other:

 Engine:   type     year built     builder      # of cylinders    bore & stroke    valve type(s)
               simple                     unknown               one             2.25" x 2"         "D" slide

 ihp          rpm            reverse type              condenser type & size                       vacuum
  2.5         300             Stephenson               keel - copper, 0.5 sq.ft.                                   

 Other: The engine is a Stuart Turner 5A which the owner and Mike Cross extensively rebuilt to withstand the rigors of marine use with eccentric driven bronze feedwater pump. Owner built wick lubricating system.

 Propulsion:    dia. & pitch    # of blades       material       make      RH or LH     shaft size
                         16" x 18"          three            bronze     unknown          RH        1.125" dia.
 steering                     auxilliaries                     paddlewheel (dia., width, & # of buckets)
 tiller

 Boiler:    type          builder          year built      bhp     operating pressure             gauges
              Ofeldt         owner              2007           n.a.              80 psi                            one
 overall size       # & size of tubes     Heat.Surface     economizer HS       superheater HS
 16" x 36"                    na                       18 sq.ft.               none                           none
 fuel              grate area     stack dia. & height         pump type       injector type     tanks
 propane            n.a.                 6" dia. x 30"                 piston             Penberthy       5 gal.

 Additional: