Name: BEAVER Home Port: Bainbridge Island, Washington Owners: Jenni Kane Email: jenniluigi@yahoo.com |
Hull: type when purchased when launched   hull builder material Poulsbo 1980 1948 R. Young wood LOA LWL beam draft capacity speed weight 18 feet 17 feet 6 feet 1.5 feet 4 adults 4.5 knots 1200 lbs. Other: An original Poulsbo hull, excellent for a small steam launch - very seaworthy and "dry". |
Engine: type year built builder # of cylinders bore & stroke valve type(s) compound 1968 Blackstaffe/Wood two 1.5"+3"x2.5" "D" slide ihp rpm reverse type condenser type & size vacuum 2.5 450  Stephenson keel, 0.625" copper, 2 sq.ft. 21" Other: Fore-and-aft compound. Feed and air pumps are crosshed driven off LP cylinder. |
Propulsion: dia. & pitch # of blades material make   RH or LH shaft size 12" x 18" three bronze unknown RH 0.875" dia. steering auxilliaries paddlewheel (dia., width, & # of buckets) cable |
Boiler: type builder year built bhp operating pressure gauges water tube Blackstaffe/Wood 1968 n.a. 145 psi three overall size # & size of tubes Heat.Surface economizer HS superheater HS 18"dia. x 18"long n.a. 10 sq.ft. 1 sq.ft. none fuel grate area stack dia. & height pump type injector type tanks propane n.a. 6" dia. x 3.5' displacement none 3 gal. |
Additional: |
|