Name: ARTEMIS Home Port: Portland, Oregon Owners: Ron Fossum & George Walrod Address: 1633 N.E. 108th Avenue, Portland, OR 97220-3026, USA Phone: 1-503-252-0896 Email: artemis@pcez.com Website: http://www.steamlaunchartemis.net |
Hull: type when purchased when launched   hull builder material Norse "kvar" owners wood LOA LWL beam draft capacity speed weight 21.5 feet 20 feet 6.7 feet 1 feet 6 adults 6+ knots 1,500 lbs. Other: The hull design is based on a well-known Viking kvar, the "Oseberg ship". The after 25% is cut off and a transom stern used. The after lines are "faired" for an underwater profile similar to the Thornycroft design. |
Engine: type year built builder # of cylinders bore & stroke valve type(s) simple Pearl Engine two 2.5" x 3" piston ihp rpm reverse type condenser type & size vacuum 3 300 Fink Link inboard (shell) 4 sq.ft. 20 inches Other: Experience with the previous Artemis proved the advantages of an inboard shell condenser. A modified hydraulic oil cooler with a 12 vdc circulating pump to provide cooling water will be used. The air pump is a Bailey or "Navy" type. |
Propulsion: dia. & pitch # of blades material make   RH or LH shaft size 18" x 27" three bronze RH 1.375" dia. steering auxilliaries paddlewheel (dia., width, & # of buckets) hyrdraulic - Kitchen Rudder |
Boiler: type builder year built bhp operating pressure gauges Winslow King Bros. 1970 4 125 psi 3 overall size # & size of tubes Heat.Surface economizer HS superheater HS 16" x 24" x 32" n.a. 25 sq.ft. none 2.5 sq.ft. fuel grate area stack dia. & height pump type injector type tanks wood/oil 1.95 sq.ft. 6" dia. x 5.5' displacement Penberthy 20 gal. |
Additional: Much more information can be found on Artemis' website. |
|